Products

AEROSIL® 200 is a hydrophilic fumed silica with a specific surface area of 200 m2/g. Widely usable in a broad range of applications.

AEROSIL® R 972 is a fumed silica after-treated with DDS (dimethyldichlorosilane). It is suitable for a broad range of applications.

Iron oxide red

Iron oxide red

Iron and manganese oxide

Iron oxide black

Iron oxide yellow

Iron oxide yellow

Iron oxide yellow

Iron oxide yellow

Iron oxide yellow

Iron oxide yellow

Iron oxide red

Iron oxide red

Iron oxide yellow

CARBOWET® 109 is a non-ionic wetting additive that provides additional dispersing properties. Wets all kinds of pigments. Was designed as alternative to APEs with a HLB-value around 13.

CARBOWET® 138 is a non-ionic wetting additive that provides additional dispersing properties. Wets all kinds of pigments. Was designed as alternative to APEs with a HLB-value around 14.

CARBOWET® GA-100 is a non-ionic grind aid for waterborne formulations. Focus on pigment wetting. Additionally helps deaeration of the millbase.

CARBOWET® GA-210 is a non-ionic grind aid for waterborne formulations. Provides dynamic pigment wetting and intermediate pigment stabilization.

CARBOWET® GA-211 is a non-ionic grind aid for waterborne formulations. Focus on pigment wetting. Additionally helps deaeration of the millbase.

CARBOWET® GA-221 is a non-ionic grind aid for waterborne formulations with focus on organic pigments and carbon blacks. Low influence on the coating properties.

COLOROL® F is a modified soya lecithin for use as a wetting and dispersing additive in solventborne formulations. Helps the wetting of pigments and provides good color strength.

DYNOL™ 607 provides extremely low dynamic and static surface tension with low to moderate foam. It is suitable for waterborne coatings and inks. DYNOL™ 607 improves solubility in a variety of demanding waterborne applications.

Dynasylan® 4148 helps to control rheological properties and to reduce viscosity in highly-filled polymer systems, like aluminum trihydroxide-filled polyesters or SMC-pastes. Contrary to most other organofunctional silanes, Dynasylan® 4148 features chemical polarity yet remaining chemically not reactive. Such a product is used as a hydrophilic compatibilizer rather than a covalent adhesion promoter. Dynasylan® 4148 permits workable viscosities at well over 250 phr aluminum trihydroxide loading in unsaturated polyester resins. Further more, Dynasylan® 4148 can be used as anti-settling agent for corrosion inhibitors in glycol based cooling agents. As a non-coupling silane Dynasylan® 4148 can also be used as a slipping agent to simply modify a surface.

HEUCODUR® Black 9-100 is a black spinel pigment based on copper for applications with highest demands on chemical resistance, temperature stability and weathering fastness..