Products

ALBIDUR® 1223 shows the highest performance in flexibilizing Silikopon® EF and Silikopon® ED without influencing chemical resistance properties, gloss, or transparency of the cured film.

ALBIDUR® EP 2240 A shows the highest performance in enhancing impact resistance without influencing chemical or corrosion resistance properties of pigmented epoxy coatings.

ALBIDUR® PU 5640 shows the highest performance in enhancing impact resistance without influencing chemical or corrosion resistance properties of pigmented 2-pack PUR coatings.

Dynasylan® HYDROSIL 2627 is an aqueous oligomeric aminoalkyl-functional silane hydrolysate. It is a colorless to slightly yellowish aqueous solution with an amine-like odour, miscible with alcohols or water. Dynasylan® HYDROSIL 2627 can be diluted with water in all proportions (stirring for at least 1 h at RT). During dilution, the oligomeric structure changes and the number of SiOH groups increases. The hydrolysates are long-term stable.

Dynasylan® HYDROSIL 2775 is an organosilicon compound (aqueous oligomeric aminoalkylfunctional silane hydrolysate) based on water as the solvent and contains no volatile organic constituents. Dynasylan® HYDROSIL 2775 contains both primary and secondary amino-functional groups. The triaminofunction of this silane is preferred to be used in the following resin systems: epoxy-, polyurethane-, imide-, phenol-, polyamide-, polyphenylene oxide and polyvinyl chloride.

Dynasylan® HYDROSIL 2776 is an aqueous oligomeric amino-functional silane hydrolysate. It is a colorless to slightly yellowish aqueous solution with an amine-like odour, miscible with alcohols or water. Dynasylan® HYDROSIL 2776 can be diluted with water in all proportions (stirring for at least 1 h at RT). During dilution, the oligomeric structure changes and the number of SiOH groups increases. The hydrolysates are long-term stable.

Dynasylan® HYDROSIL 2909 is an aqueous oligomeric aminoalkyl-functional silane hydrolysate. It is almost colorless aqueous solution with an amine-like odour, miscible with alcohols or water. Dynasylan® HYDROSIL 2909 can be diluted with water in all proportions (stirring for at least 1 h at RT). During dilution, the oligomeric structure changes and the number of SiOH groups increases. The hydrolysates are long-term stable.

Dynasylan® HYDROSIL 2926 is an aqueous oligomeric diol-functional silane hydrolysate, which acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers). Dynasylan® HYDROSIL 2926 is a colorless to slightly yellowish aqueous solution, miscible with alcohols or water. Dynasylan® HYDROSIL 2926 is a bifunctional organic compound in which the functional silanol groups can be bonded to an inorganic substrate; the organophilic diol-functional group can interact with a suitable polymer. The particular advantage of Dynasylan® HYDROSIL 2926 compared with the corresponding epoxyfunctional alkoxysilanes is its nonflammability, the fact that no volatile organic constituents are released and the fact that no particular equipment safety precautions are necessary. Dynasylan® HYDROSIL 2926 can be diluted with water in all proportions. The hydrolysates are long-term stable. Examples of suitable inorganic substrates are glass, glass fibres, glass wool, mineral wool, silicic acid, quartz, sand, cristobalite, wollastonite and mica; also suitable are aluminium trihydroxide, kaolin, talc, other silicate fillers, metal oxides and metals. Examples of particularly suitable polymers are epoxy resins, polyurethanes, phenolic resins, furane resins, melamine resins, PA, PBT, PC, EVA, PP, PVAC, acrylates and silicone.

Dynasylan® MTES, an alkyltrialkoxysilane is an important component in sol-gel systems. Dynasylan® MTES is a colorless, low-viscosity liquid. Use requires acid- or alkali-catalysed hydrolysis. Dynasylan® MTES is regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally Dynasylan® MTES contains a methyl group that adds organic character to the products. Hydrolysis leads to silanol groups which, in a subsequent condensation reaction, form very stable siloxane bonds (-Si-O-Si-). Condensation occurs parallel to hydrolysis once a certain amount of silanol groups have been formed. The absolute and relative rates of hydrolysis and condensation depends on a number of factors. The most important factors include pH, concentration, solvent, temperature and the catalyst.

Dynasylan® MTMS, an alkyltrialkoxysilane is an important component in sol-gel systems. Dynasylan® MTMS is a colorless, low-viscosity liquid. Dynasylan® MTMS is regarded as trifunctional since all three alkoxy groups are able to hydrolyze. Additionally Dynasylan® MTMS contains a methyl group that adds organic character to the products. Hydrolysis leads to silanol groups which, in a subsequent condensation reaction, form very stable siloxane bonds (-Si-O-Si-). Condensation occurs parallel to hydrolysis once a certain amount of silanol groups have been formed. The absolute and relative rates of hydrolysis and condensation depend on a number of factors. The most important factors include pH, concentration, solvent, temperature and the catalyst.

Dynasylan® OCTEO is a clear colourless liquid and soluble in common non-polar organic solvents (e.g. petroleum ether, toluene). However its low volatility and viscosity make Dynasylan® OCTEO an easy-to-handle additive. During the hydrolysis reaction between water and Dynasylan® OCTEO a certain amount of ethanol (VOC) is released.

Dynasylan® OCTMO is a monomeric medium-chain alkylfunctional silane. Dynasylan® OCTMO is a clear colourless liquid and soluble in common non-polar organic solvents (e.g. petroleum ether, toluene). However its low volatility and viscosity make Dynasylan® OCTMO an easy-to-handle additive. During the hydrolysis reaction between water and Dynasylan® OCTMO a certain amount of methanol (VOC) is released.

Dynasylan® PTEO is a colourless, low-viscosity liquid. Dynasylan® PTEO is regarded as trifunctional since all three alkoxy groups can hydrolyze. Additionally Dynasylan® PTEO contains a propyl group that adds a hydrophobic character to the coatings. Hydrolysis leads to silanol groups which, in a subsequent condensation reaction, form very stable siloxane bonds (-Si-O-Si-). Condensation occurs parallel to hydrolysis once a certain amount of silanol groups have been formed. The absolute and relative rates of hydrolysis and condensation depend on a number of factors. The most important factors include pH, concentration, solvent, temperature and the catalyst.

Dynasylan® PTMO is a colourless, low-viscosity liquid. Dynasylan® PTMO is regarded as trifunctional since all three methoxy groups can hydrolyze. Dynasylan® PTMO also contains a propyl group that adds hydrophobic character to sol-gel coatings. Hydrolysis leads to silanol groups which, in a subsequent condensation reaction, form very stable siloxane bonds (-Si-O-Si-). Condensation occurs parallel to hydrolysis once a certain amount of silanol groups have been formed. The absolute and relative rates of hydrolysis and condensation depend on a number of factors. The most important factors include pH, concentration, solvent, temperature and the catalyst.

Hydrite® PXN is a water-washed kaolin pigment ideally suited for a number of demanding coating applications including electrodeposition. Hydrite® PXN has undergone specialized processing to reduce the ionic contamination to a minimum resulting in low conductivity in aqueous suspensions and to control the particle size distribution.

Luzenac 10M0 is a fine chloritic talc. Recommended for water- and solvent-borne decorative paints, industrial primers and topcoats, automotive primers. Provides pigment extension, rheology control, barrier properties, corrosion resistance and gloss adjustment.

Luzenac ST60 is a standard chloritic talc recommended for industrial primers to enhance barrier and corrosion resistance. Suitable for high filling low VOC coaitngs.

NANOCRYL® C 130 shows the highest performance in scratch- and abrasion-resistance without influencing gloss or transparency of the cured UV-coating.

NANOCRYL® C 140 shows the highest performance in scratch- and abrasion-resistance without influencing the gloss or transparency of the cured UV-coating.

NANOCRYL® C 150 shows the highest performance in scratch and abrasion resistance without influencing the gloss nor transparency of the cured UV-coating

NANOCRYL® C 152 shows the highest performance in scratch and abrasion resistance without influencing the gloss nor transparency of the cured UV-coating

NANOCRYL® C 153-10 shows the highest performance in scratch- and abrasion-resistance without influencing the gloss or transparency of the cured UV-coating.

NANOPOL® C 750 shows very high performance in scratch- and abrasion-resistance without influencing the gloss or transparency of waterborne coatings.

NANOPOL® C 764 shows the highest performance in scratch- and abrasion-resistance without influencing the gloss or transparency of the coating.

NANOPOL® C 784 shows the highest performance in scratch- and abrasion-resistance without influencing the gloss or transparency of the coating.