Key benefits
- provides a good water beading effect
- provides deep substrate penetration
- applicable on alkaline substrates
TEGO® Phobe 6510
TEGO® Phobe 6510 is a formulation of a polysiloxane resin / silane-blend for waterborne impregnations and primers.
Product information
Type
Additive
Sub type
Durability & resistance
Sustainability
Durability
VOC reduction
Next generation solution
Markets
Technologies
Waterborne
Manufacturer
Availability
Technical data
active matter content
approx. 50 %
appearance
white liquid
chemical description
emulsion of a polysiloxane resin/silane-blend
solvent
solvent-free
Properties
Reduced water uptake
5/5Water beading effect
4/5Low tendency to pick up dirt
3/5Early water resistance
2/5Recommended addition level
As supplied calculated on total formulation: 5.0 - 25.0 %.
Processing instructions
For hydrophobic impregnations, the active matter content should be diluted to 5-25%.
For hydrophobic primers, a combination with acrylic hydrosols is recommended. The higher the absorption of the substrate, the higher the hydrosol content should be.
Dilutions ready for sale should be protected with a preservative.
Handling & storage
When stored in an original unopened packaging between +4 and +40°C, the product has a shelf life of 24 months from the date of manufacture.
Technical Data Sheets
No datasheets available. Please contact our technical support.
Additional Information
No datasheets available. Please contact our technical support.
Safety Datasheets
Please use the Evonik SDS service.