Ancamine® 2519 is a modified cycloaliphatic polyamine intended for use as an ambient curing agent for liquid epoxy resin. The product is a low viscosity curing agent which exhibits moderate to good carbamation resistance at 10°C. Ancamine® 2519 can be used to formulate high solid coatings, self-levelling and screed flooring where good chemical resistance is required.
Type
Crosslinker
Sub type
Polyamine
Markets
Technologies
Key facts
Manufacturer
Availability
Coatino Campus
Offering vital insights into chemical compliance within the decorative coatings market, this webinar will focus on the growing demand for greener and more sustainable products. It will explore regulatory trends and innovative digital solutions that address the increasing communication needs across the value chain.
Coatino Campus
Recorded Webinar: As climate change continues to impact our daily lives and industrial requirements, the challenges faced in hot climate regions such as the Middle East and Africa, as well as Southern Europe with its rising summer temperatures, are becoming increasingly significant. Professionals in the construction and coatings sectors must adapt to these soaring temperatures and high humidity to ensure effective epoxy flooring applications. With Ancamine® 2858, Evonik’s epoxy curing agent business has just developed a product for these conditions, giving the right balance between handling, application time and rapid cure speed.
Coatino Campus
Recorded Webinar: This webinar shows you how to enhance the beauty of your floor with a range of coating additives from Evonik.
Coatino Campus
Recorded Webinar: Evonik coating additive portfolio for high solid, ultra high solid and solvent-free systems.
Coatino Campus
Recorded Webinar: We were delighted to offer a joint webinar with Synthomer, one of the world’s leading suppliers of sustainable water-based and differentiated polymer solutions.
This webinar has focused on the importance of pre-treatment of metal surfaces. The session has coved the application of 1K anti-corrosion primers and direct-to-metal (DTM) coatings, highlighting their benefits in protecting against environmental factors. Additionally, we have discussed the film formation process and common surface defects that can impact performance.
This webinar was part of the Surface Weeks.
Coatino Campus
Recorded Webinar: The Importance of Sustainable Solutions: Defoaming, Anti-Corrosion, and Anti-Fouling effect for Marine & Protective Coatings. During this live webinar we had focused on various sustainable topics for Marine & Protective Coatings.
